Before I highlights the simple steps on how to prevent your android device from being bricked, we have to have a full knowledge of what bricking is all about. so read about Brick. Now that you have the basic knowledge about bricking.
image
However, you also find terms like “hard-brick” and “soft-brick” used, which makes the term “brick” less absolute: A soft-brick is something you easily can recover from (count it as a “temporary paper-weight”),
mostly by software-based solutions (e.g. re-flash your phone)
while a “target brick is rather meant in the way the original term points to.
Still, technically spoken, even a “hard-bricked” device could be “unbricked” — but mostly this is more expensive then getting a new device.
As for the warranty declaration you quoted: For a normal user, it’s almost impossible to (hard-) brick his device. Even when flashing a custom ROM, this can rarely happen, as there are many security-layers involved. Almost always you can boot your device into some fall-back mode where it is at least recognized by some “flashing software”, so you could simply flash another/the original firmware back. Which means, the risk you are taking is today depends on your device 1 . A “hard-brick” is quite unlikely with “normal operations” like rooting or flashing custom ROMs.
However, you also find terms like “hard-brick” and “soft-brick” used, which makes the term “brick” less absolute: A soft-brick is something you easily can recover from (count it as a “temporary paper-weight”), mostly by software-based solutions (e.g. re-flash your phone) — while a “hard-brick” is rather meant in the way the original term points to.
Still, technically spoken, even a “hard-bricked” device could be “unbricked” — but mostly this is more expensive then getting a new device.
As for the warranty declaration you quoted: For a normal user, it’s almost impossible to (hard-) brick his device. Even when flashing a custom ROM, this can rarely happen, as there are many security-layers involved. Almost always you can boot your device into some fall-back mode where it is at least recognized by some “flashing software”, so you could simply flash another/the original firmware back. Which means, the risk you are taking is to “soft-brick” your device. A “hard-brick” is quite unlikely with “normal operations” like rooting or flashing custom ROMs.
Preventing your android device from being bricked
Follow this simple instructions
==>Keep USB Debugging enabled on your device.
This will help you unbrick it if something bad happens.
Here’s how to do that across various Android versions:
·
On Android 2.3 and below, go to Settings > Applications > Development. Tick the USB Debugging Checkbox to enable it.
·
On Android 4.0 and 4.1, go to Settings > Developer Options and enable USB Debugging from there.
·On Android 4.2 and above, go to Settings > About Phone.
Recommended:Samsung trademarks S6 Edge Plus name
In this screen, find something called Build number. Tap on it seven times to unlock Developer Options on your device. Then, follow the instructions you see after.
brick+android+device
==>Take a Nandroid Backup.
A nandroid backup of a device is the full backup of your Android phone which can be restored at any point of time to bring it back to the same state when it was backed up.
Obviously, when you backup your device, it is not bricked. And when it gets bricked and you restore the nandroid backup, it is not bricked!
To take a nandroid backup of your device, you need to have a custom recovery like clockworkmod or TWRP.
As an extra step of precaution, copy the backup files to your computer’s hard disk or at any other place you consider safe so that you don’t end up accidentally deleting them from your sd card.
==>Finally,Never install or flash your device with application not men?t for your Android phone.
No comments:
Post a Comment